[StATS]: Documenting your SPSS data sets (created 1999-09-18)
*Dear Professor Mean
- I need to add some documentation for SPSS data sets that I am creating. I know you covered this in your “Gentle Introduction to SPSS” class
- but I’ve already forgotten everything. Can you review this for me? – Baffled Bill*
The only things people remember from my training classes are my jokes. The rest is unimportant.
It’s great that you want to take the time and effort to document your data. SPSS can rapidly produce dozens of graphs and hundreds of tables. Without good documentation as part of these graphs and tables, you can easily get lost. A little time spent now in data documentation will save you a lot of time later when you are interpreting your output.
In versions 10 and later of SPSS
there are two tabs at the bottom of the SPSS screen
Use the DATA VIEW tab to enter your data
- or to view your data. Use the VARIABLE VIEW tab to add documentation to your data.
From VARIABLE VIEW tab
- you can tell SPSS how to display the data in the SPSS data editor window (how many decimal places shown
- how dates are displayed
- and how wide the columns are). You can also provide SPSS with informational labels that will appear in your output window (labels for the variable itself and
- if needed
- labels for category levels). You would also use the dialog box to specify any codes that represent missing data.
There are a lot of important ways in which you can document your data. Start with the variable name itself
- a brief description of up to eight characters of what this column of data contains. Then specify the format type (numeric
- or date) for the data that is in this column. Now you can provide a longer description of your variable in the variable label. If your data are categorical
- you can describe those categories using values labels. Finally
- make sure that SPSS know which code
- if any
- you use to designate missing values. Repeat this task for each column of data.
When documenting your data
- your first step should be to provide a brief but descriptive variable name. This goes into the NAME column of the VARIABLE VIEW tab. SPSS provides a default of VAR00001 for the first column
- VAR00002 for the second column and so forth. This coding is convenient in that it allows you to produce names for up to 99,999 columns of data. But if you have that much data
- I hope you will get some help with your data entry.
Please spend some time to provide descriptive variable names. These names have to be 8 characters or less. It can be a mxiture of numbers and letters
- but the very first character has to be a letter (A1 is okay
- but 1A is not). The variable name can’t include any blanks because it confuses SPSS (when SPSS sees a variable name like “BIRTH WT” it interprets this as two variables
- “BIRTH” and “WT”. For the most part
- SPSS does allows no special symbols in varaible names. There is one exception
- the underscore character (_). I’m glad they allowed this exception
- because it makes it easy to create a variable name that looks like it has a blank (e.g.
- BIRTH_WT). Also
- don’t bother mixing upper and lower case here; SPSS converts everything to lower case.
The variable name restrictions on length
- special symbols and case can be frustrating at times
- but don’t worry. When you type in a variable label
- you can type in just about anything that makes you happy.
After you provide a variable name
take a look at the other columns in the VARIABLE VIEW tab. Of special interest are the following:
middle of the DATA | DEFINE VARIABLES dialog box. There are four button here: TYPE
- MISSING VALUES
- and COLUMN FORMAT.
Click in theTYPE column to add or change the format type. You will notice a gray button on the right hand side. Click on it to get VARIABLE TYPE dialog box.
This dialog box has information about the type of data that you want to use. The most common data type is **NUMERIC
- which is used for any data that can be represented solely by numbers**. If you have numeric data
- you should tell SPSS the width of your numbers and how many decimal places you want displayed. Unless you are dealing with unusually large numbers
- the default width of 8 works well. For some situations
- you might be tempted to use a smaller makes
- but this can make it more difficult to view the variable name and the value labels. Be sure to set the number of decimal places appropriately.
For data with number codes or count data
- you should change the number of decimal places to zero from the default of two. It’s a minor point
- but the superfluous .00 at the end of every number will make your data harder to read. For some data
- you may instead need to display more than two decimal places. Keep in mind
- that this dialog box controls how the data are displayed in the data editor window and not (for the most part) how they are displayed in the output window.
Select the STRING options for data that is all letters or a mixture of letters and numbers.When you select this option
- SPSS provides a chance for you to tell how long the strings are.
- I encourage people to use number codes instead of letter codes for categorical data. SPSS gets confused sometimes by letter codes and restricts their use in certain procedures. Also keep in mind that SPSS places even greater restrictions on long strings (more than 8 characters in length). This is a holdover from the days of FORTRAN and IBM mainframe computers
- where strings longer than 8 bytes could not be easily manipulated.
If you click on the DATE option
- you will be given choices between various display formats (month names versus month numbers
- two digit versus four digit years
- etc.). After all the publicity about the year 2000 problem
- I don’t need to lecture you on being careful with dates. But also remember that people disagree over whether the month or the date should appear first.
Variable and value labels
Click on the label button to get variable labels. A variable label is a longer description of your data. Variable labels appear in your output and make it easier to follow what is going on. You can use a mixture of upper and lower case here
- which I recommend for improving readability. AVOID USING ALL UPPERCASE HERE BECAUSE IT IS FAR LESS READABLE THAN A MIXTURE OF CASES.
You can put blanks and special symbols in your variable label. If you are very excited about a variable
- spice it up with a couple of exclamation points. Go ahead and type to your heart’s content. Just a small warning though. A variable label that is too long can make your output look a bit unwieldy. Although you can type up to 255 characters here
- it looks strange to have a six inch label underneath a two inch histogram. A variable label of around 20 to 40 characters in length works well in practice.
You can also specify value labels in this dialog box. Value labels provide informative names for levels in any categorical variable. Leave the value labels blank for continuous data like weight or height. They do make sense
- for categorical data like gender. This will serve as a reminder that data values of 1 represents males and 2 females. The last thing you want is for people to think that you can’t tell the difference between males and females.
Value labels have to be defined one by one. **Type in the number (or letter) code for your category in VALUE field
- the value label in the VALUE LABEL field just beneath it and then click on the ADD button**. Repeat this for your second category level and so forth.
Missing value codes
- click on the MISSING VALUES button to designate missing value codes. **Missing value codes are useful for designating data in SPSS where the value is unknown
- not applicable or otherwise not provided**.
Be careful about missing values. Values can be missing because the subject dropped out of the study. Perhaps you are looking for chemical concentrations that are sometimes too low for a laboratory to detect. Perhaps a subject refused to respond to a certain question. Perhaps you are asking for something like a spouse’s age that is not applicable for a single person. Make sure you understand why your data is missing and discuss this issue with anyone you are consulting with. The statistical handling of missing values can vary greatly depending on how the value came to be missing.
When you are planning your project
- it is a good idea to select a very clearly impossible code for your missing value. For example, use -1 for a birth weight because any infant with a negative birth weight would float up to the ceiling after delivery. Use a value of 9 to code missing for gender
- since it is obvious to most of us that the number of possible genders is much smaller than 9.
I usually ignore the COLUMN FORMAT button
- but you can click here if you like. If you didn’t specify a width that differs from the SPSS default width of 8 earlier
- you can do so here. You can also tell SPSS to left justify
- or right justify this column of data in the data editor window. SPSS chooses a logical default of left justification for strings and right justification for just about everything else.
Let’s see how to document a column of data that represents marital status. **Marital status is a categorical variable with five codes (1=single
- 9=unknow)**. First we have to choose “marit_st” as a variable name. The eight character limit forces us to select an abbreviated description like this or mar_stat.
We use numeric codes for this variable
- so we keep the NUMERIC option selected. With no values larger than 9
- we could change the WIDTH field a little bit
- but anything much smaller than 8 makes it difficult to see the variable name and the value labels later. The number codes here do not require any decimals
- so we change the DECIMAL PLACES field from 2 to 0.
A nice variable label is “Marital Status of the Infant’s Mother”. Notice that we can include an apostrophe here. I also used a mixture of upper and lower case. This is easier to read than all lower case and much easier than all upper case.
The value labels are “Single”; “Married”; “Divorced”; “Widowed”; and “Unknown”. Notice again that I use mixed case. Value labels are appropriate here because this is a categorical variable. For a continuous variable like birth weight
- we would leave the value labels blank.
- I designate 9 as a missing value.
Baffled Bill needs to provide some documentation to SPSS data sets that he is creating. Professor Mean explains that you add documentation by selecting DATA | DEFINE VARIABLE from the SPSS menu or double clicking on the column header. You can then provide information about the variable name
- the format type
- the variable label
- the value label
- and the missing value code. You should invest some time now with documentation because SPSS can easily produce dozens of graphs and hundreds of tables. Good documentation will help you keep your bearings in all of this output.
This page was written by Steve Simon while working at Children’s Mercy Hospital. Although I do not hold the copyright for this material
- I am reproducing it here as a service
- as it is no longer available on the Children’s Mercy Hospital website. Need more information? I have a page with general help resources. You can also browse for pages similar to this one at Category: Data management or Category: SPSS software.
software](../category/SpssSoftware.html). management](../category/DataManagement.html) or [Category: SPSS [Category: Data for pages similar to this one at with general help resources. You can also browse Children’s Mercy Hospital website. Need more information? I have a page reproducing it here as a service
- as it is no longer available on the Hospital. Although I do not hold the copyright for this material
- I am This page was written by Steve Simon while working at Children’s Mercy